Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the "Service" indicator on a Toyota RAV4?

Model: Toyota Rav 4 Xa50, MK 5 - Years 2019-2026
Part: Service warning light

To reset the "Service" light on a Toyota RAV4, you can use the buttons on the steering wheel to access the settings menu. Once in the menu, look for the option related to maintenance or warning messages. Select this option and look for the option to reset the "Service" light or maintenance message. Once located, follow the reset procedure indicated on the screen. This procedure may vary slightly depending on the specific model and year of production of your RAV4, so make sure to consult the owner's manual for detailed instructions. Once the reset procedure is completed, turn off the car and restart it to verify that the "Service" light has been successfully reset.

Posted on 20 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Toyota Rav 4 (2019-2026 / Xa50, MK 5) To reset the "Service" light on a Toyota RAV4, start by turning on the instrument panel without starting the engine. Use the buttons on the steering …
Toyota Rav 4 (2019-2026 / Xa50, MK 5) To reset the "Service" light on a Toyota RAV4, turn on the instrument panel without starting the engine. Use the buttons on the steering wheel to nav…
Toyota Rav 4 (2013-2018 / MK 4, Xa40) To manually reset the tyre warning light on your Toyota RAV4 fourth generation (2013-2018), follow these simple steps. First, enter the cabin and tur…

Other guides you may be interested in

    Frequently Asked Questions

    • Rav 4 2000-2006 - What does the oil light of the Toyota RAV4 indicate? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos