Do it yourself
Frequently asked questions about cars and motorcycles

Position and diagram of the fuses of the Toyota Yaris XP130.

Model: Toyota Yaris Xp130 - Years 2011-2019
Part: Fuse box

We can see in this video the position and diagram of the fuse boxes of the Toyota Yaris XP 130. We find a fuse box inside the passenger compartment, located under the steering wheel, both for the right-hand drive and for the left-hand drive. As for the fuse and relay box located inside the engine compartment, it is located near the starter battery, while a second fuse box is located on the opposite side of the engine compartment, near the outer side of the compartment itself. The cigarette lighter fuse (which is also a power outlet) is located in the fuse box inside the passenger compartment and is number 23.

Posted on 8 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Toyota Yaris (2011-2019 / Xp130) In this video tutorial, we will see the positioning of the fuse boxes and their diagram for the Toyota Yaris. First, open the bonnet and locate the e…
Toyota Yaris (2011-2019 / Xp130) In this guide, we will look at the positioning of the fuse boxes (internal and external) and how to find their diagram for the Toyota Yaris. First, g…
Toyota Yaris (2011-2019 / Xp130) The video presented here illustrates the fuse diagram for the 2013 Toyota Yaris. As you can immediately notice from the first few seconds, these elem…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2005-2011 - Where is the Toyota Yaris fuel pump relay located? Read answer
    • Yaris 2005-2011 - What is the Toyota Yaris horn fuse? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos