Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the fuse diagram for the Toyota Yaris?

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Fuse box

See other generations:
Video tutorial

In this video we can see where the fuse boxes of the Toyota Yaris are located and what their respective diagrams are, useful in case we need to check the fuses of a malfunctioning device. We find the first box inside the passenger compartment, precisely in the lower left area of the dashboard on the driver's side.

The second box is located inside the engine compartment, protected by the plastic cover on the passenger side, while the third and last box is located near the battery. Make sure to replace faulty fuses with replacements of equivalent specifications.


Posted on 10 March 2025 by ScegliAuto


Related tutorials

What is the Fuse Diagram and Where is the Fuse Box on a Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) The video attached to this article shows the exact diagram and placement of all the fuses in your Toyota Yaris. Fuses are designed to prevent damage …
What is the Fuse Diagram for the Toyota Yaris?
Toyota Yaris (1999-2005 / Xp10) In this video, we can see the fuse diagram and the location of the respective boxes in the Toyota Yaris, useful if you need to check the status of a …
How to Access the Internal Fuse Box of the Toyota Yaris
How to Access the Internal Fuse Box of the Toyota Yaris
Toyota Yaris (2020-2026 / MK 4) Below are the instructions that will allow you to access the internal fuse box of the Toyota Yaris, along with the fuse diagram. First, open the fron…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2005-2011 - Where is the Toyota Yaris fuel pump relay located? Read answer

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos