Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Timing Belt on a Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Timing belt

See other generations:
Video tutorial

Let's see how to remove and replace the timing belt on a Toyota Yaris. Open the bonnet and secure it. Remove the coolant reservoir with a socket wrench, the plastic cover on the front bumper, and disconnect the wiring harness using pliers.

Lift the car with a column lift to access the underside. Remove the wheel (if necessary) and use a screwdriver to remove the side plastic undertray.

Use a spanner to loosen the tensioner and slide the belt off its seat. Install the new belt, tighten everything with the socket wrench.

Finally, reinstall the reservoir and the plastic cover with the securing pins.


Updated on 3 March 2026 by ScegliAuto


Related tutorials

Replacing the Timing Belt on a Toyota Yaris
Replacing the Timing Belt on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) .. In this video tutorial, you will learn how to remove and replace the timing belt on a Toyota Yaris. The procedure for replacing the belt on.. …
How to Remove the Timing Belt on the Toyota Yaris?
How to Remove the Timing Belt on the Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) The YouTuber who created this video shows the exact procedure for removing the timing belt from a Toyota Yaris. This tutorial is valid for all vehicl…
Guide to Replacing the Timing Chain on the Toyota Yaris 1.4
Guide to Replacing the Timing Chain on the Toyota Yaris 1.4
Toyota Yaris (2005-2011 / Xp90) Today's main steps will allow us to remove and replace the timing chain on the Toyota Yaris 1.4. To replace the chain, it is necessary to remove the …

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos