Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Toyota Yaris key remote battery

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

See other generations:
Video tutorial

The information provided in this guide will show us how to disassemble and replace the battery of the Toyota Yaris key remote. First, we take our remote and begin by removing the physical key; then we remove the plastic cover of the remote to access the battery compartment, as shown in the video.

At this point, we remove the battery found inside the remote, replacing it with a new one (of the correct type and with the same code); we insert the battery in the correct direction and reassemble the cover and the physical key of the remote.


Posted on 19 August 2025 by ScegliAuto


Related tutorials

How to Replace the Remote Battery of the 2017 Toyota Yaris
How to Replace the Remote Battery of the 2017 Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) When the remote battery of the Toyota Yaris runs low, follow these steps for replacement: - Insert a small flathead screwdriver into the top right co…
How to Replace the Remote Battery of the Toyota Yaris?
How to Replace the Remote Battery of the Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) To replace the battery of the Toyota Yaris remote, press the button located on the side of the device: this will allow you to extract the key from th…
How to change the battery of the key remote for a Toyota Yaris.
How to change the battery of the key remote for a Toyota Yaris.
Toyota Yaris (2011-2019 / Xp130) In this tutorial, you can see how to replace the battery of the remote control for a Toyota Yaris car key. Take the car remote and slide the small bu…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos