Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Maintenance reset on a Toyota Tundra

Model: Toyota Tundra Xk50 - Years 2007-2021
Part: Service warning light

In today's video, we will see how to reset the maintenance light on a second-generation Toyota Tundra. We start the procedure by turning on the vehicle's instrument panel without starting the engine, then press the right button on the speedometer until the "trip A" screen appears on the information display, and then turn off the panel. Now, press and hold the previous button and turn the vehicle's ignition back on, we will see the reset message in progress, so continue holding the button until the reset is complete.

Posted on 27 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter in a Toyota Tundra
How to Replace the Cabin Air Filter in a Toyota Tundra
Toyota Tundra (2007-2021 / Xk50) This guide will show you how to properly replace the cabin air filter in your Toyota Tundra second generation (model years 2007-2021). First, keep yo…
How to Replace the Headlight Bulb on a Toyota Tundra
How to Replace the Headlight Bulb on a Toyota Tundra
Toyota Tundra (2000-2006 / Xk40, Xk30) To replace the headlight bulb on your first-generation Toyota Tundra (2000-2006) by yourself, follow the steps outlined in this guide. First, turn of…
Where to Find the Fuse Box on the Toyota Tundra 3
Where to Find the Fuse Box on the Toyota Tundra 3
Toyota Tundra (2022-2026 / Xk70) In this new mini guide dedicated to your Toyota Tundra third generation (model year 2022-2023), you will discover where the fuse box is located so yo…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos