Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you recharge the battery of the Toyota Yaris?

Model: Toyota Yaris MK 4 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Battery

See other generations:
Video tutorial

In order to recharge the battery of the Toyota Yaris, you need to open the hood so that you can access the components inside the engine compartment: on the top right of the compartment you will find the 12V battery of the car. This can be charged by connecting a battery charger to a power outlet and attaching the clamps to the poles of the battery: this way you can wait a few minutes for the battery to be fully charged.

At the end of the procedure, you can disconnect the device and check that everything is working.


Posted on 19 January 2026 by ScegliAuto


Related tutorials

How to charge the battery of the Toyota Yaris
How to charge the battery of the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Today we will show you how to connect the booster to a Toyota Yaris Hybrid with a dead battery. Turn on the car's instrument panel and lift the hood …
Where is the Battery Located on the Toyota Hybrid Yaris?
Where is the Battery Located on the Toyota Hybrid Yaris?
Toyota Yaris (2020-2026 / MK 4) Unlike many Toyota models, the Hybrid Yaris places the battery inside the vehicle. The battery of the Toyota Hybrid Yaris is located within the cabin…
How to Replace the Key Battery of a Toyota Yaris
How to Replace the Key Battery of a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Start by inserting the tip of a flathead screwdriver into the slot on the side of your Toyota Yaris key and lever it open. Then, detach and remove th…

    Frequently Asked Questions

    • Yaris 2011-2019 - How much does it cost to replace the batteries in the Toyota Yaris Hybrid in the UK? Read answer

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos