Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear lights of the Toyota Auris.

Model: Toyota Auris E180 - Years 2012-2018
Part: Tail light bulb

Shortly, we will see the instructions that will allow us to disassemble and replace the bulbs of the rear light of the Toyota Auris. First, we open the rear door of the trunk and start unscrewing the fixing screws that we find on the side of the light, disconnecting its electrical connector to remove it; then we proceed to disconnect the individual bulb holders, replacing any faulty bulbs with new ones (having the same fitting). At this point, we reassemble and connect the rear light, checking the operation of all the rear lights.

Posted on 4 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear light of the Toyota Auris
How to disassemble the rear light of the Toyota Auris
Toyota Auris (2007-2012 / E150) In a few simple steps, we will see the process of disassembling and replacing the rear light and its bulbs of the Toyota Auris. First, we open the re…
How to Replace the Rear Light Bulbs in the Toyota Auris?
How to Replace the Rear Light Bulbs in the Toyota Auris?
Toyota Auris (2007-2012 / E150) In this tutorial, you will see how to replace the rear light bulbs in the Toyota Auris, a very simple and quick operation. First, ensure that the ins…
Replacement of the rear headlight bulbs of the Toyota Auris
Replacement of the rear headlight bulbs of the Toyota Auris
Toyota Auris (2012-2018 / E180) Today's steps will show us how to disassemble and replace the rear taillight bulbs of the Toyota Auris. First, we open the rear hatch of the trunk an…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos