Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure warning light on the Toyota Yaris?

Model: Toyota Yaris Xp130 - Years 2011-2019
Part:

It will be possible to reset the tire pressure warning light of the Toyota Yaris by inflating the tires until they are brought back to the recommended pressure value: this value is indicated on the sticker attached to the driver's side door pillar. Once the inflation is done, it will be possible to turn on the instrument panel by inserting the ignition key into the corresponding slot: once the panel is turned on, it will be possible to press and hold the low pressure button below the steering column.

Posted on 8 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on the Toyota Yaris?
How to Reset the Tyre Pressure Light on the Toyota Yaris?
Toyota Yaris (2020-2026 / MK 4) To reset the tyre pressure light on the Toyota Yaris, first inflate the tyres to the correct pressure, which is indicated on the sticker attached to …
How to Reset the Tyre Pressure Warning Light on the Toyota Yaris?
Toyota Yaris (2020-2026 / MK 4) To reset the tyre pressure warning light on the Toyota Yaris, first inflate the tyres to the correct pressure value, which is indicated on the sticke…
How to Reset the Tyre Pressure Warning Light on the Toyota Yaris xp130
How to Reset the Tyre Pressure Warning Light on the Toyota Yaris xp130
Toyota Yaris (2011-2019 / Xp130) This guide shows how to reset the tyre pressure warning light on the 2019 Toyota Yaris. The reset procedure requires pressing the button located at t…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2020-2027 - What to do in case of tire warning light on Toyota Yaris? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos