Do it yourself
| ||||
|
Toyota Yaris - Video tutorial
Model: Toyota Yaris
Xp90
- Years 2005-2011 In this video we can see how to check and inflate the tires of a Toyota Yaris: the pressure is measured in PSI (pounds per square inch), the measurement used in Anglo-Saxon countries; in Kpa (Kilopascal) which is the international measurement; we add the measurement used in the European Community which is the Bar; this measurement is found in the owner's manual or on the metal plate located in the driver's side door jamb, which shows the values recommended by the Manufacturer for the front and rear tires, fully loaded and with only the driver. We can inflate the tires with the pump found at any gas station; remove the dust cap and connect the nozzle to the valve, and when the pressure is reached we can disconnect the nozzle; repeat the process on all four tires and on the spare wheel.
Posted on 5 April 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.024
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |