Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the Parking Sensors on the Toyota Venza

Model: Toyota Venza MK  2, Xu80 - Years 2020-2026
Part: Checks and maintenance

The following steps will allow you to activate and deactivate the parking sensors on the Toyota Venza. First, get inside the vehicle and turn on the ignition; then navigate to the vehicle settings using the steering wheel controls, and select the parking sensors option, as shown in the video. At this point, deactivate the parking sensor system and the audible alert; you can reactivate the parking sensors through the same menu, finally exiting the onboard computer settings.

Posted on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure light on the Toyota Venza?
How do you reset the tire pressure light on the Toyota Venza?
Toyota Venza (2008-2017 / MK  1, Av10) To reset the tire pressure warning light on the Toyota Venza, you need to inflate the tires to the recommended pressure value: this value is indicate…
Replacing the Headlight Bulbs on a Toyota Venza
Replacing the Headlight Bulbs on a Toyota Venza
Toyota Venza (2008-2017 / MK  1, Av10) This guide will show you how to disassemble and replace the headlight bulbs on a Toyota Venza, following the instructions below. First, open the hood…
How to reset the service light on the Toyota Venza 2
How to reset the service light on the Toyota Venza 2
Toyota Venza (2020-2026 / MK  2, Xu80) To complete the manual reset of the service light on the instrument panel of your second generation Toyota Venza, you must follow the steps described…

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos