Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on Toyota Auris

Model: Toyota Auris E180 - Years 2012-2018
Part: Service warning light

To manually reset the service light on your Toyota Auris, follow the procedure described in this guide. First, get into the car and turn on the ignition, then ensure that 'Trip A' is displayed on the screen. At this point, turn off the instrument panel and press and hold the 'Trip' button located on the right side of the steering wheel. While holding it, turn the ignition back on and wait a few seconds until the display confirms the service light has been reset. Finally, turn off the car.

Posted on 19 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Service light on a Toyota Auris?
How to reset the Service light on a Toyota Auris?
Toyota Auris (2012-2018 / E180) To reset the Service light on a Toyota Auris, press and hold the button located to the right of the instrument cluster until "Trip A" appears on it. …
How to Reset the Service Light on the Toyota Auris?
How to Reset the Service Light on the Toyota Auris?
Toyota Auris (2012-2018 / E180) To reset the Service light on the Toyota Auris, turn on the ignition by rotating the key in the ignition switch. Once the dashboard is lit, navigate …
How to Reset the Service Light on a Toyota Auris?
How to Reset the Service Light on a Toyota Auris?
Toyota Auris (2007-2012 / E150) You can completely clear the Service light that appears on the instrument panel of the Toyota Auris by holding down the button located at the bottom …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos