Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Light on the Toyota Auris Hybrid

Model: Toyota Auris E210 - Years 2018-2024
Part: Service warning light

In today’s article, you will see how to reset the oil change light, or service light, on the Toyota Auris Hybrid. It is recommended to perform the reset only after having the vehicle serviced. To reset the light, turn off the engine and the ignition, press the TRIP button located on the right side of the instrument panel, while holding the button, turn on the ignition without starting the engine. Now wait for the reset procedure to complete; when the light on the panel goes off, release the button and the procedure will be complete. Then restart the ignition to verify that the reset has occurred correctly and that the light is no longer present on the panel.

Posted on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Hybrid Battery on a Toyota Auris.
How to Replace the Hybrid Battery on a Toyota Auris.
Toyota Auris (2012-2018 / E180) In this video tutorial, you can see how to replace the battery on a hybrid Toyota Auris. The hybrid battery is located under the rear seats of the ve…
Replacing the Oil Filter on a Toyota Auris
Replacing the Oil Filter on a Toyota Auris
Toyota Auris (2007-2012 / E150) Is it time to replace the oil filter on your Toyota Auris? Here’s how to do it. Lift the vehicle on a column lift, unscrew the oil filter housing (us…
How to Reset the Oil Warning Light on the 2008 Toyota Auris
Toyota Auris (2007-2012 / E150) If the oil warning light on the instrument panel lights up every time you start your 2008 Toyota Auris, despite having already changed the fluid and …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos