Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Toyota RAV4?

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part:

On the instrument panel of the Toyota RAV4, the tyre pressure warning light can be cleared by inflating all the tyres until they reach the correct inflation pressure: this value will be indicated on the sticker located on the driver’s door pillar. Once the tyres are inflated, activate the car's instrument panel by turning the key in the ignition; then, press and hold the button with the low pressure icon located beneath the steering column. This will allow you to notice that the warning light will be eliminated.

Posted on 27 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on the Toyota RAV4
How to Reset the Tyre Pressure Light on the Toyota RAV4
Toyota Rav 4 (2025-2026 / Xa60) Today we will see the instructions that will allow us to reset the tyre pressure light on the Toyota RAV4; before resetting the TPMS sensors, ensure …
How to Reset the Tyre Pressure Light on a Toyota RAV4?
How to Reset the Tyre Pressure Light on a Toyota RAV4?
Toyota Rav 4 (2019-2026 / Xa50, MK 5) The tyre pressure light on a Toyota RAV4 can be reset by inflating the car's tyres to the correct pressure: this value is indicated on the sticker lo…
How do you reset the tire pressure light of the Toyota RAV 4?
How do you reset the tire pressure light of the Toyota RAV 4?
Toyota Rav 4 (2013-2018 / MK 4, Xa40) The tire pressure warning light that appears on the instrument panel of the Toyota RAV 4 can be reset by inflating all tires to the recommended press…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos