Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on a Toyota RAV4

Model: Toyota Rav 4 MK 3, Xa30 - Years 2006-2013
Part: Tire pressure warning light

In this short and simple guide, you will learn how to reset the tyre pressure warning light (TPMS) on a Toyota RAV4. Initially, when you turn on the ignition, you will see the TPMS light start to flash; then proceed to repair or replace the tyre, ensuring all four tyres are at the correct operating pressure. This way, the TPMS system will recognise the correct tyre pressure, automatically resetting the TPMS light on the dashboard!

Updated on 18 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Warning Light on the Toyota RAV4
How to Reset the Tyre Warning Light on the Toyota RAV4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) To manually reset the tyre warning light on your Toyota RAV4 fourth generation (2013-2018), follow these simple steps. First, enter the cabin and tur…
How to reset the tire pressure light on a Toyota Rav4?
How to reset the tire pressure light on a Toyota Rav4?
Toyota Rav 4 (2013-2018 / MK 4, Xa40) To reset the tire pressure light on a Toyota RAV4, start by turning on the instrument panel without starting the engine. Locate the reset button loca…
How to reset the low tire pressure warning light on a Toyota Rav4?
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Good morning, today we are here to reset the low tire pressure warning light on our Toyota RAV4. Before we begin, we will need to inflate all the car…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos