Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Absolute Pressure Sensor on the Toyota Auris 1.6i

Model: Toyota Auris E150 - Years 2007-2012
Part: MAF sensor

In this brief guide, you will find instructions to remove and replace the absolute pressure sensor or mass airflow sensor on the Toyota Auris 1.6i. First, open the bonnet and remove the plastic cover from the engine. Next, locate the absolute pressure sensor, situated at the bottom of the intake manifold, as shown in the video. Disconnect its electrical connector and undo the screws with a socket, also disconnecting the pressure hose. Remove the pressure sensor and replace it with the new original part.

Posted on 12 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on Toyota Auris
How to Reset the Service Light on Toyota Auris
Toyota Auris (2012-2018 / E180) To manually reset the service light on your Toyota Auris, follow the procedure described in this guide. First, get into the car and turn on the ignit…
How to Remove the Door Panel on a Toyota Auris
How to Remove the Door Panel on a Toyota Auris
Toyota Auris (2012-2018 / E180) Before starting, open the door of your Toyota Auris. Begin by prying out and removing the inserts from the door panel. This will expose the screws th…
Replacing the Reverse Light Bulb on a Toyota Auris
Replacing the Reverse Light Bulb on a Toyota Auris
Toyota Auris (2012-2018 / E180) Follow this guide to remove and replace the reverse light bulb, as well as the other bulbs in the rear lamp of the Toyota Auris. First, open the boot…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos