Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Activate the Park Assist System on a Toyota Corolla

Model: Toyota Corolla MK 5, E210 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Checks and maintenance

See other generations:
Video tutorial

In this guide, discover the instructions to activate and use the park assist system on the Toyota Corolla. First, position yourself near a spacious parking area for your vehicle; press the park assist activation button located on the dashboard, as shown in the video.

Once the parking space is detected by the camera, you can activate the system by selecting reverse gear when prompted on the instrument panel. The vehicle will then carry out all the manoeuvres until the operation is complete.


Posted on 25 September 2026 by ScegliAuto


Related tutorials

How to Disable Traction Control on a Toyota Corolla?
How to Disable Traction Control on a Toyota Corolla?
Toyota Corolla (2013-2019 / E160, E170, MK 4) To disable traction control on a Toyota Corolla, insert the ignition key into the ignition switch so that the instrument panel is lit up: once the pa…
How to Disconnect the Passenger Airbag on a Toyota Corolla
How to Disconnect the Passenger Airbag on a Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Disconnecting the passenger seat airbag on a Toyota Corolla can be done independently. The first step, although not mentioned in the following video …
How to activate and deactivate the parking sensors of the Toyota Corolla
How to activate and deactivate the parking sensors of the Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) These short and simple instructions will show us how to enable and disable the parking sensors of the Toyota Corolla. First, we get into the car and …

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos