Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Spark Plugs on Toyota Yaris

Model: Toyota Yaris Xp10 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Spark plugs

See other generations:
Video tutorial

Replace the damaged spark plugs on a Toyota Yaris. Pull the lever to open the engine bay and lift the front bonnet, securing it in place.

Remove the air filter box covering the engine head. Undo the side bolts of the coils, remove the coils, then use a socket spanner to unscrew the spark plugs and pull them out of the head.

Take the new spark plugs and guide them into the engine head using the socket extension, tighten them securely, refit the power coils, and screw the side bolts back in. Refit the air box and close the bonnet.


Updated on 16 March 2026 by ScegliAuto


Related tutorials

Replacing the Spark Plugs on the Toyota Yaris
Replacing the Spark Plugs on the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In this tutorial, you will learn how to remove and replace the engine spark plugs on the Toyota Yaris by following these simple and quick steps. Firs…
Replacing Spark Plugs on Toyota Yaris
Replacing Spark Plugs on Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Want to remove the spark plugs from a Yaris? Let's see how to do it. Lift the front bonnet of the car, and start by removing the air filter housing: …
Removing Spark Plugs on Toyota Yaris
Removing Spark Plugs on Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) How do you remove the spark plugs from a Toyota Yaris? Let’s see how to remove the spark plugs from the Toyota Yaris. Lift the front bonnet and secur…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos