Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Tail light

See other generations:
Video tutorial

Removing the rear light on the second series Toyota Yaris is a fairly simple task that should not require professional assistance with a bit of manual skill. Open the boot, and at the location of the light to be removed, there will be a small plastic cover; this will be secured by clips, and you just need to lever it off with a screwdriver.

Once the cover is removed, you will have access to the back of the light where two 10 mm fixing nuts will be visible that need to be unscrewed. This will leave the light secured to the car only by plastic hooks, so it will be sufficient to lever around its perimeter to detach it from the vehicle.

At this point, only the power connector will remain, which, once disconnected, will allow you to completely remove the light from the car. If you wish to recover the bulb holders, these can be detached from inside the light, allowing the removal of the entire wiring.


Updated on 18 March 2026 by ScegliAuto


Related tutorials

Removing the Rear Light on a Toyota Yaris
Removing the Rear Light on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In this video tutorial, you will learn how to remove the rear light of a second-generation Toyota Yaris. First, open the boot lid and remove the side…
How to Remove the Rear Light on the Toyota Yaris Verso
How to Remove the Rear Light on the Toyota Yaris Verso
Toyota Yaris (1999-2005 / Xp10) In today's video, you will see the steps to remove and replace the rear light on the first series Toyota Yaris Verso. First, open the tailgate of the…
Replacing the Front Headlamp on a Toyota Yaris
Replacing the Front Headlamp on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) The following steps will guide you on how to remove and replace the front headlamp on a Toyota Yaris. First, open the engine bonnet and begin by remo…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos