Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlamp on a Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Headlight

See other generations:
Video tutorial

The following steps will guide you on how to remove and replace the front headlamp on a Toyota Yaris. First, open the engine bonnet and begin by removing the front bumper; to do this, unscrew all the fixing screws located above and below the bumper, removing additional screws located on both sides of the front wheel arches.

At this point, unscrew the screws of the headlight assembly to remove it, using a 10 mm spanner, disconnecting the electrical connector of the bulbs; replace the bulbs or the entire front headlamp, and finally refit the bumper!


Updated on 8 November 2026 by ScegliAuto


Related tutorials

Replacement of the front headlight of the Toyota Yaris
Replacement of the front headlight of the Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Today's main instructions will show us how to disassemble and replace the front headlight of the Toyota Yaris. First, we open the car's hood and star…
Disassembly and replacement of the front headlight of the Toyota Yaris
Disassembly and replacement of the front headlight of the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Today's step-by-step instructions will allow us to disassemble and replace the front headlight of the Toyota Yaris. First, we lift the car and start …
Replacing the Front Headlamp Bulb on the Toyota Yaris
Replacing the Front Headlamp Bulb on the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) This guide will outline the steps and instructions for removing and replacing the front headlamp bulb on the Toyota Yaris. First, open the bonnet of …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos