Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting Service Light on Toyota Verso

Model: Toyota Verso MK 4 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

Using the ignition key, turn off the engine and the instrument panel, then turn on only the instrument panel. Press the button next to the small display until you reach the maintenance screen.

Turn off the instrument panel again. Now, before turning it back on, hold down the button: while doing this, turn on the panel, continuing to hold the button.

You will see the reset screen appear: do not release the button until the reset is complete. When the 'normal' screen reappears, you can release the button and turn the panel off and on one last time.


Updated on 2 April 2026 by ScegliAuto


Related tutorials

How to reset the service light on a 2016 Toyota Verso.
How to reset the service light on a 2016 Toyota Verso.
Toyota Verso (2009-2018 / MK 4) To perform the reset procedure for the service light related to the car service on a 2016 Toyota Verso, we need to turn on the instrument panel while…
Reset of the tire pressure warning for the Toyota Verso.
Reset of the tire pressure warning for the Toyota Verso.
Toyota Verso (2009-2018 / MK 4) The instructions outlined in this guide will allow us to reset the tire pressure warning light on the Toyota Verso. Before performing the TPMS sensor…
How to reset the tyre warning light on the Toyota Verso?
How to reset the tyre warning light on the Toyota Verso?
Toyota Verso (2009-2018 / MK 4) As shown in this tutorial, resetting the tyre warning light on the Toyota Verso is a very simple and quick operation. Before proceeding, ensure that …

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos