Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of a Toyota Verso key

Model: Toyota Verso MK 4 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Key

See other generations:
Video tutorial

Today we will see how to change the battery of a Toyota Verso key, fourth series model. This operation is very simple to perform and we can do it independently and in just a few seconds, but let's see how to proceed now. Let's start the procedure immediately by taking a small slotted screwdriver to pry on the back cover of the remote control and then remove it as shown in the video.

Once we have done this, we will immediately have the old battery to replace, so let's proceed to remove it and insert a new one with the positive side facing upwards, finally we close everything to complete the job.


Posted on 29 June 2025 by ScegliAuto


Related tutorials

How to replace the battery of the Toyota Verso
How to replace the battery of the Toyota Verso
Toyota Verso (2009-2018 / MK 4) Below we will discover the procedure for disassembling and replacing the battery of the Toyota Verso. First, we open the hood of the car and begin to…
Replacing the Starter Motor of the Toyota Corolla Verso
Replacing the Starter Motor of the Toyota Corolla Verso
Toyota Verso (2004-2009 / MK 3) Today's main instructions will show you how to remove and replace the starter motor of the Toyota Corolla Verso. First, open the bonnet of the vehicl…
Where to find and how to reach the fuse box of a Toyota Verso?
Where to find and how to reach the fuse box of a Toyota Verso?
Toyota Verso (2009-2018 / MK 4) Good morning, today's guide aims to discover the location of the fuse box in our Toyota Verso. Start by sitting in the driver's seat of the car. Next…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos