Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Verso
    4. : How to replace the battery located in the remote key on Toyota Verso

Toyota Verso - Video tutorial

Model: Toyota Verso MK 4 - Years 2009-2018
Part: Key
Operation: How to replace the battery located in the remote key on Toyota Verso

How to replace the battery located in the remote key on Toyota Verso? Let's see how to proceed: take our remote control and extract the metal key; let's go with the help of a screwdriver to pry between the two parts of the key cover. We pry until the cover cap separates from the cover; unscrew the small screws from above the cover and extract the battery with a screwdriver (let's take a new one of the same size and voltage). We reassemble the two parts of the cover by pressing on the remote control key until you hear the lock click. Finally, insert the metal key into the remote control. We check the exact operation of the remote control.


Posted on 13 November 2023 by ScegliAuto



Remote control key battery replacement
Toyota Verso (2009-2018 / MK 4) Replacing the remote control key battery is very simple: in the back of the remote control there is a small slot in which it is possible to insert th
How to reset / reset service on Toyota Verso
Toyota Verso (2009-2018 / MK 4) Let's see in this video how to reset / reset the service on Toyota Verso. We turn on the instrument panel of our car with the special remote control
What is the fuse scheme in the Toyota Verso?
Toyota Verso (2009-2018 / MK 4) In this video we can see where the fuse boxes are, and what the respective schemes are, in the Toyota Verso, useful in case we need to check the fuse

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos