Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Starter Motor of the Toyota Corolla Verso

Model: Toyota Verso MK 3 - Years: 2004, 2005, 2006, 2007, 2008, 2009
Part: Starter motor

See other generations:
Video tutorial

Today's main instructions will show you how to remove and replace the starter motor of the Toyota Corolla Verso. First, open the bonnet of the vehicle and start by disconnecting the battery; then raise the vehicle and unscrew all the fastening screws of the starter motor, disconnecting its electrical connector to remove it, as shown in the video.

At this point, remove and replace the starter motor with the new one, securing it properly and finally checking the correct operation of the starter!


Updated on 7 September 2026 by ScegliAuto


Related tutorials

Removal and Replacement of the Starter Motor on the Toyota Corolla Verso 1.8 VVT-I
Removal and Replacement of the Starter Motor on the Toyota Corolla Verso 1.8 VVT-I
Toyota Verso (2004-2009 / MK 3) This guide will show you how to remove and replace the starter motor on the Toyota Corolla Verso 1.8 VVT-I. First, open the bonnet of the vehicle and…
Removing the Starter Motor from a Toyota Verso
Removing the Starter Motor from a Toyota Verso
Toyota Verso (2009-2018 / MK 4) Remove the starter motor from a Toyota Verso if damaged. Open the bonnet and secure it. First, remove the plastic covers of the battery and engine, t…
How to Reset the Service Light on the Toyota Corolla Verso?
How to Reset the Service Light on the Toyota Corolla Verso?
Toyota Verso (2004-2009 / MK 3) Resetting the service light on the Toyota Corolla Verso, as shown in this tutorial, is a very simple and quick operation. Before proceeding, ensure t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos