Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Verso
    4. : How to reset the tire warning light in Toyota Verso?

Toyota Verso - Video tutorial

Model: Toyota Verso MK 4 - Years 2009-2018
Part: Tires
Operation: How to reset the tire warning light in Toyota Verso?

As we can see in this tutorial, resetting the tire warning light in the Toyota Verso is an extremely simple and fast operation. Before proceeding, we must have restored the correct pressure of each tire by following the instructions given in the manual. Let's start by going inside the passenger compartment and turning on the instrument panel, after which we identify the button depicting the same light located under the dashboard, on the driver's side. At this point, hold it down for about 15 seconds, or in any case for the time necessary for the light to flash and then disappear.


Posted on 4 December 2022 by ScegliAuto



How to reset the tire pressure warning light on a Toyota Verso
Toyota Verso (1995-2002 / MK 1) When your car signals that there is a tire problem, the first thing you need to do is definitely check all four tires to find out where the problem i
How do you reset the tire pressure light on the Toyota Verso?
Toyota Verso (2009-2018 / MK 4) In order to reset the tire pressure warning light on the Toyota Verso, you first need to inflate the tires so that they reach their optimal pressure
How do you reset the tire pressure warning light on the Toyota Verso?
Toyota Verso (2009-2018 / MK 4) In order to reset the tire pressure warning light of the Toyota Verso, you need to inflate all the tires to the recommended pressure value: this valu

    Frequently Asked Questions

    • Verso 2009-2018 - Why does the Toyota Verso tire light stay on? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos