Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on the Toyota Verso?

Model: Toyota Verso MK 4 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tire pressure warning light

See other generations:
Video tutorial

The procedure to reset the tyre pressure light on the Toyota Verso involves turning on the instrument panel by inserting the ignition key into the switch: then turn it to start the panel. At this point, locate the button to press and hold to reset the light: this will be found under the steering column.

By holding this button for a few seconds, you will notice that the tyre pressure light will disappear from the instrument panel: the light will remain off if the tyres have been inflated to the optimal pressure value.


Updated on 16 August 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on a Toyota Verso?
How to Reset the Tyre Pressure Warning Light on a Toyota Verso?
Toyota Verso (2009-2018 / MK 4) To reset the tyre pressure warning light on a Toyota Verso, inflate all the tyres to the recommended pressure value: this value is indicated on the s…
How to Reset the Tyre Pressure Light on the Toyota Verso?
How to Reset the Tyre Pressure Light on the Toyota Verso?
Toyota Verso (2009-2018 / MK 4) To reset the tyre pressure light on the Toyota Verso, first inflate the tyres to their optimal pressure: this value is indicated on the sticker affix…
Reset of the tire pressure warning for the Toyota Verso.
Reset of the tire pressure warning for the Toyota Verso.
Toyota Verso (2009-2018 / MK 4) The instructions outlined in this guide will allow us to reset the tire pressure warning light on the Toyota Verso. Before performing the TPMS sensor…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos