Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on a Toyota Verso?

Model: Toyota Verso MK 4 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tyre pressure warning light on a Toyota Verso, inflate all the tyres to the recommended pressure value: this value is indicated on the sticker affixed to the driver’s door pillar. After inflating the tyres, turn on the instrument panel by pressing the appropriate button.

At this point, locate the button used to reset the warning light, found under the steering column. Hold it down for a few seconds until the light turns off, then switch off the instrument panel.


Updated on 8 September 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Light on the Toyota Verso?
How to Reset the Tyre Pressure Light on the Toyota Verso?
Toyota Verso (2009-2018 / MK 4) The procedure to reset the tyre pressure light on the Toyota Verso involves turning on the instrument panel by inserting the ignition key into the sw…
How to Reset the Tyre Pressure Light on the Toyota Verso?
How to Reset the Tyre Pressure Light on the Toyota Verso?
Toyota Verso (2009-2018 / MK 4) To reset the tyre pressure light on the Toyota Verso, first inflate the tyres to their optimal pressure: this value is indicated on the sticker affix…
How to reset the tire pressure warning light on the Toyota Verso
How to reset the tire pressure warning light on the Toyota Verso
Toyota Verso (2009-2018 / MK 4) Let's see the useful information for resetting the tire pressure monitoring system (TPMS) light on the Toyota Verso; before performing the reset, it …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos