Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Indicator Bulb on a Toyota Corolla

Model: Toyota Corolla MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Side marker bulb

See other generations:
Video tutorial

Lift the bonnet and place the support rod. Facing the front of the car, you will notice that the bulb for the indicator is the most lateral one. Access the back of the headlamp, then inside the bonnet, and unscrew the connector located at the back of the bulb until you can pull it out. Once done, you can also remove the bulb from the connector by simply pulling it out by hand.

Insert the new bulb, ensuring it is secured properly, and refit the connector-bulb assembly by screwing it in until it feels secure.

As you can see, this is a very simple operation and within everyone's reach.


Updated on 6 April 2026 by ScegliAuto


Related tutorials

How to Replace the Indicator Bulb on a Toyota Corolla
How to Replace the Indicator Bulb on a Toyota Corolla
Toyota Corolla (1995-2002 / MK 1) In the following video, you will see how to replace the side indicator bulb on a Toyota Corolla. This procedure is very simple and does not require a…
Where is the Indicator Fuse Located on a Toyota Corolla?
Where is the Indicator Fuse Located on a Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) In this video, you will see where the indicator fuse is located on a Toyota Corolla, one of the components to check if the indicators stop working wh…
How to Replace the Rear Indicator Bulb on a Toyota Corolla Mk2
How to Replace the Rear Indicator Bulb on a Toyota Corolla Mk2
Toyota Corolla (2000-2007 / MK 2) This guide shows how to replace the rear indicator bulb on a Toyota Corolla Mk2. To perform this operation, remove the ignition key from the ignition…

How to Program a New Key for a Mini Cooper

Programming a new key for a Mini Cooper model R56 is a very simple operation. The first thing to do is to get into the vehicle and sit in the driver's seat. Next, insert the new key into the ignition slot and start the car; after a few seconds, turn off the car and remove the key from the ignition. Wait a few seconds and repeat this process three more times before hitting the road. By doing this, your new key will be perfectly programmed for starting and stopping the vehicle.

Watch the video!


by ScegliAuto

More videos