Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Indicator Bulb on a Toyota Corolla Mk2

Model: Toyota Corolla MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Tail light

See other generations:
Video tutorial

This guide shows how to replace the rear indicator bulb on a Toyota Corolla Mk2. To perform this operation, remove the ignition key from the ignition switch and disconnect the negative terminal of the battery to avoid possible short circuits. Open the boot and locate the plastic screw securing the tail light finishing panel.

Move the plastic cover to access the bulb holder. Unscrew the indicator bulb holder by turning it anti-clockwise.

Refit everything in position and check the correct operation of the lights.


Updated on 3 June 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb of the Toyota Corolla?
How to Replace the Rear Light Bulb of the Toyota Corolla?
Toyota Corolla (2013-2019 / E160, E170, MK 4) To replace the rear light bulb of the Toyota Corolla, you need to detach the two pins located inside the boot, accessible by opening the rear hatch. …
How to Remove the Rear Seat Bench of a Toyota Corolla
How to Remove the Rear Seat Bench of a Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Before you can start, open the rear doors of your Toyota Corolla. Begin by inserting a thin, long, and sturdy tool under the rear seat bench. Then, l…
How to Replace the Front Bulb on a Toyota Corolla
How to Replace the Front Bulb on a Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) In today's video, you will see how to replace the front headlamp bulb on a Toyota Corolla. Remove the sealing cap and then take out the plastic prote…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos