Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear taillight of a Toyota Corolla Verso

Model: Toyota Corolla MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Tail light

See other generations:
Video tutorial

In this video we can see how to change the rear light of a Toyota Corolla Verso: we open the hood and see that on the side of the trunk we find a compartment that can be opened, giving us access to the rear light: this on both sides, in a very convenient and clean way. In fact, all we have to do is reach in with our hand and disconnect the electrical connector, then with a ratchet wrench, we will remove the screws holding the optical group to the bodywork.

At that point, it will be very easy to remove it from the outside.

By turning it over, we will have easy access to the bulbs to change them: it will be just as easy to put it back in place following the reverse path.


Posted on 6 August 2025 by ScegliAuto


Related tutorials

How to replace the rear light cluster on a Toyota Corolla Verso MK2
How to replace the rear light cluster on a Toyota Corolla Verso MK2
Toyota Corolla (2000-2007 / MK 2) We can see in this video how to replace the rear light cluster of a Toyota Corolla Verso MK2: there are many videos online where we see that to remov…
Replacing the Rear Light of a Toyota Corolla
Replacing the Rear Light of a Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) In these brief and simple steps, you will learn how to dismantle and replace the rear light and its bulbs on a Toyota Corolla. First, open the boot a…
Location and Fuse Box Diagram for Toyota Corolla Verso
Location and Fuse Box Diagram for Toyota Corolla Verso
Toyota Corolla (2006-2013 / MK 3) In this video tutorial, locate the fuse box and its diagram on a Toyota Corolla Verso. Find the various fuse boxes on the left side of the steering w…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos