Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Indicator Bulb on a Toyota Corolla

Model: Toyota Corolla MK 1 - Years 1995-2002
Part: Side marker bulb

In the following video, you will see how to replace the side indicator bulb on a Toyota Corolla. This procedure is very simple and does not require any special tools. Before starting, turn off the engine. With a gentle pressure, remove the indicator lens by hand. As you will notice, the lens is directly connected to the bulb that needs replacing. Rotate the bulb while holding the lens until the two pieces separate. At this point, using a cloth, unscrew the bulb and replace it with the new one. Reconnect the lens to the bulb and reposition it in place, and the job is complete.

Updated on 28 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Indicator Bulb on a Toyota Corolla Mk2
How to Replace the Rear Indicator Bulb on a Toyota Corolla Mk2
Toyota Corolla (2000-2007 / MK 2) This guide shows how to replace the rear indicator bulb on a Toyota Corolla Mk2. To perform this operation, remove the ignition key from the ignition…
How to Replace the Rear Light Bulb of the Toyota Corolla?
How to Replace the Rear Light Bulb of the Toyota Corolla?
Toyota Corolla (2013-2019 / MK 4, E170, E160) To replace the rear light bulb of the Toyota Corolla, you need to detach the two pins located inside the boot, accessible by opening the rear hatch. …
How to Replace the Front Headlight on the Toyota Corolla
How to Replace the Front Headlight on the Toyota Corolla
Toyota Corolla (1995-2002 / MK 1) To replace the front headlight bulb on the Toyota Corolla, open the bonnet to access the engine and grasp the connector connected to the bulb at the …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos