Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Rear Boot Gas Struts on a Toyota Yaris 1

Model: Toyota Yaris Xp10 - Years 1999-2005
Part: Body

Let's see how to disassemble and replace the gas struts or rear pistons of the boot on a first-generation Toyota Yaris, following these simple and brief steps. First, open the rear hatch and using a socket wrench, unscrew the securing screws at the base of the struts themselves, as shown in the video; then detach and remove them. At this point, install the new struts, cleaning the mounting area with a degreaser, and secure them with the bolts; follow the video to the end to fully understand all the steps!

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Open and Close the Boot of the Toyota Yaris
How to Open and Close the Boot of the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Today's instructions will show you how to open and close the rear boot of the Toyota Yaris in simple steps. First, move to the rear of the vehicle an…
How to Replace the Rear Light Bulb on a Toyota Yaris
How to Replace the Rear Light Bulb on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Before you can start, open the boot lid of your Toyota Yaris. Begin by unfastening and removing the side cover inside the boot by simply releasing th…
Replacing the Boot Light Bulb on a Toyota Yaris
Replacing the Boot Light Bulb on a Toyota Yaris
Toyota Yaris (2020-2026 / MK 4) To replace the boot light bulb on the Toyota Yaris, simply remove the complete light unit with the bulb holder: insert the tip of a small flathead sc…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos