Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Climate Control Commands on a Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Air conditioner

See other generations:
Video tutorial

First, remove the side and top plastics above the air vents using a screwdriver. Unscrew each visible screw on the sides of the climate control panel, after which both the air vents and the command section can be pulled out by hand, as they will only be held by plastic clips.

At this point, disconnect the cables if you want to change the control panel; otherwise, you can change the bulb by removing the plastic cover and unscrewing the tiny light inside. Proceed in reverse to reassemble everything.


Updated on 11 April 2026 by ScegliAuto


Related tutorials

Removing the Climate Control Controls from a Toyota Yaris
Removing the Climate Control Controls from a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In this video tutorial, you will learn how to remove the central dashboard of the climate control controls from a Toyota Yaris. First, get inside the…
How to Remove the Front Bumper of a Toyota Yaris
How to Remove the Front Bumper of a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Start by opening the bonnet of your Toyota Yaris by pulling the designated release handle located at the bottom left of the steering column. Next, un…
How to Turn on the Air Conditioning in a Toyota Yaris?
How to Turn on the Air Conditioning in a Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) Certainly! To turn on the air conditioning in your Toyota Yaris, start by ensuring the car is on. Then, look towards the dashboard, where you will fi…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos