Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Aygo
    4. : Remove the front bumper on a Toyota Yaris

Toyota Aygo - Video tutorial

Model: Toyota Aygo Ab40, MK 2 - Years 2014-2023
Part: Rear bumper
Operation: Remove the front bumper on a Toyota Yaris

Let's see the disassembly of the front bumper and the attached pieces. Let's lift the bonnet and put it in safety. We remove the tightening rivets placed in the upper part of the bumper (we use plastic lever). Once the rivets in the upper part have been removed, we unscrew the stone guard rivets and finally remove the pins located in the lower part of the bumper (we unscrew the screws that tighten the front bumper). We remove the bumper from the car body by hand. After removing the bumper from above the front of the car, we just have to fit a new one. We use the same assembly system.


Posted on 30 January 2024 by ScegliAuto



Toyota Aygo front bumper removal
Toyota Aygo (2014-2023 / Ab40, MK 2) In today's video tutorial we will see how to remove the front bumper of a 2014 Toyota Aygo. First we open and lift the bonnet and we go to remove the
How do you remove the front headlight of the Toyota Aygo?
Toyota Aygo (2005-2014 / MK 1, Ab10) The procedure for removing the front headlight on the Toyota Aygo involves first completely removing the front bumper by unscrewing its respective fi
How do you remove the front headlight of the Toyota Aygo?
Toyota Aygo (2005-2014 / MK 1, Ab10) To remove the front headlight of the Toyota Aygo, you first need to loosen the screws that secure the front bumper of the car. These screws are locat

    Frequently Asked Questions

    • Aygo 2005-2014 - How much does it cost to replace the rear bumper of the Toyota Aygo? Read Answer

How to reset the Renault Master AdBlue warning light

If when you turn on the ignition you see a strange warning relating to AdBlue, do not worry because it is nothing serious. Everything is solved in a few minutes and with a very low cost. In fact, it is a particular additive used in Diesel engines to reduce the environmental impact. Before continuing with the various steps it is therefore necessary to purchase a tank of AdBlue. Furthermore, all the various operations must be carried out with the engine off. The AdBlue tank is located on the passenger side, between the door and the tailgate. Unscrew the blue cap present and pour in the new AdBlue with the help of a rubber hose or an appropriate funnel. Once this is done, you can close the tank and the flap. Switch on the ignition again and the warning light has disappeared.

Watch the video!


by ScegliAuto

More videos