Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Evoque
    4. : How do I replace the Land Rover Evoque auxiliary battery?

Land Rover Evoque - Video tutorial

Model: Land Rover Evoque MK 1, L538 - Years 2011-2018
Part: Battery
Operation: How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.


Posted on 4 July 2022 by ScegliAuto

    Frequently Asked Questions

    • Evoque 2011-2018 - Where is the auxiliary battery located in the Range Rover Evoque? Read Answer
    • Evoque 2011-2018 - Where is the auxiliary battery of the Land Rover Evoque located? Read Answer
    • Evoque 2011-2018 - Where is the battery located on Range Rover Evoque? Read Answer
    • Evoque 2011-2018 - What is the cost of the Evoque auxiliary battery? Read Answer
    • Evoque 2011-2018 - Where is the Range Rover Evoque battery located? Read Answer
    • Evoque 2018-2025 - Where is the battery located in my Land Rover Evoque? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos