Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Evoque
    4. : How do i replace the battery of the Land Rover Evoque?

Land Rover Evoque - Video tutorial

Model: Land Rover Evoque MK 1, L538 - Years 2011-2018
Part: Battery
Operation: How do i replace the battery of the Land Rover Evoque?

In order to replace the Land Rover Evoque battery, you need to open the hood, access the engine compartment and identify the battery that will be located to the right of the engine block. The latter will be fixed to its housing by means of special fixing bolts: by unscrewing these bolts and disconnecting the terminals connected to the battery, it will be possible to extract the device from its housing so that it can be replaced with a new spare part. After the new battery has been installed, it will be possible to secure it with its bolts and connect it to the appropriate cables.


Posted on 23 August 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Evoque 2011-2018 - Where is the auxiliary battery located in the Range Rover Evoque? Read Answer
    • Evoque 2011-2018 - Where is the auxiliary battery of the Land Rover Evoque located? Read Answer
    • Evoque 2011-2018 - Where is the battery located on Range Rover Evoque? Read Answer
    • Evoque 2011-2018 - What is the cost of the Evoque auxiliary battery? Read Answer
    • Evoque 2011-2018 - Where is the Range Rover Evoque battery located? Read Answer
    • Evoque 2018-2025 - Where is the battery located in my Land Rover Evoque? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos