Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Horn on the Citroën Berlingo?

Model: Citroen Berlingo MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the horn on the Citroën Berlingo, lift the vehicle so you can loosen the screws securing the left front wheel, completely removing it. Once the wheel is removed, you can access the screws that secure the inner wheel arch cover: this needs to be detached to access the components inside, including the horn.

Disconnect the horn from its connector and remove it from its supports so that it can be replaced with a new spare part.


Updated on 1 June 2026 by ScegliAuto


Related tutorials

Where are the Fuses on the Citroën Berlingo?
Where are the Fuses on the Citroën Berlingo?
Citroen Berlingo (1996-2013 / MK 1) The fuses on the Citroën Berlingo are located inside the designated fuse boxes installed within the vehicle. In this model, the first box is position…
Where is the Fuse Box Located on the Citroen Berlingo?
Where is the Fuse Box Located on the Citroen Berlingo?
Citroen Berlingo (1996-2013 / MK 1) The Citroen Berlingo produced from 2003 to 2012 has two fuse boxes. The first fuse box is located under the bonnet, specifically near the battery, an…
Where Are the Fuses on a Citroën Berlingo?
Where Are the Fuses on a Citroën Berlingo?
Citroen Berlingo (2008-2018 / MK 2) The fuses on a Citroën Berlingo are housed within designated fuse boxes installed in the vehicle: this model has two fuse boxes. The first is located…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos