Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Position Light on Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Headlight

See other generations:
Video tutorial

Open the bonnet and support it with the prop rod. As shown in the video, remove the lower fixing of the headlamp located in the wing. To do this, simply press it in the centre and then pull.

Do the same with the five upper fixings that hold the front bumper. This will then be detached without completely removing it (see video).

For safety, disconnect the battery. Unscrew the front screw of the lamp and the side one. The bulk of the work is already done! Now, with a bit of force, detach the lamp and unscrew the affected bulb, then insert the new one and reassemble everything in reverse order.


Updated on 14 April 2026 by ScegliAuto


Related tutorials

Replacing the Rear Headlamp Bulb on a Toyota Yaris
Replacing the Rear Headlamp Bulb on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Today, learn how to remove and replace the rear headlamp bulb on a first-generation Toyota Yaris. First, open the boot and remove the plastic side co…
How to Replace the Rear Wiper Blade on the Toyota Yaris
How to Replace the Rear Wiper Blade on the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Replacing the rear wiper blade on a Toyota Yaris is a very simple and quick task to do yourself. Lift the wiper arm and position the blade horizontal…
In the Toyota Yaris 2, how do you replace the license plate light?
Toyota Yaris (2005-2011 / Xp90) This can easily be defined as a simple job within everyone's reach, that of replacing the license plate light, not only for the Toyota Yaris 2, but f…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos