Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Urban Cruiser
    4. : Replacing the air filter on Toyota Urban Cruiser

Toyota Urban Cruiser - Video tutorial

Model: Toyota Urban Cruiser MK 1 - Years 2009-2014
Part: Air filter
Operation: Replacing the air filter on Toyota Urban Cruiser

Raise the hood and secure it. As shown at the beginning of the video, the filter box connector is disconnected. Now unhook the attachments that hold the cover in place and remove it. Take out the air filter and, while you're at it, give the inside of the box a good clean with rags and compressed air. Insert the new filter equivalent to the removed one (and insert it in the correct direction, as you found the original), then mount the lid and close it. Plug the connector back in and that's it. As you can see, this is a very simple operation.


Posted on 22 February 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos