Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light of the Toyota Urban Cruiser?

Model: Toyota Urban Cruiser MK 1 - Years 2009-2014
Part: Service warning light

To reset the Service light of the Toyota Urban Cruiser, turn on the instrument panel and then repeatedly press the ODO TRIP button until "Trip A" appears on the display. When this message is shown, turn off the instrument panel and press the button again: while holding it down, insert the ignition key and turn it to activate the instrument panel. Continue holding the button, and after a few seconds, you will notice that the light resets, allowing you to turn off the instrument panel.

Updated on 23 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you turn off the traction control of the Toyota Urban Cruiser?
How do you turn off the traction control of the Toyota Urban Cruiser?
Toyota Urban Cruiser (2009-2014 / MK 1) It will be possible to deactivate the traction control of the Toyota Urban Cruiser by first inserting the ignition key into the corresponding slot, i…
How to reset the service light on the Toyota Urban Cruiser?
How to reset the service light on the Toyota Urban Cruiser?
Toyota Urban Cruiser (2009-2014 / MK 1) In this tutorial we can see how to reset the service in the Toyota Urban Cruiser, an extremely simple and quick operation, to be carried out only onc…
How to Reset the Maintenance Service on a Toyota Urban Cruiser
How to Reset the Maintenance Service on a Toyota Urban Cruiser
Toyota Urban Cruiser (2009-2014 / MK 1) Learn how to reset the maintenance service on a Toyota Urban Cruiser. Turn on the instrument panel of your car with the appropriate remote key; press…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos