Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light in a Toyota Urban Cruiser?

Model: Toyota Urban Cruiser MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
Video tutorial

In this tutorial, you will see how to reset the service light in a Toyota Urban Cruiser, a very simple and quick operation to perform only after completing all required scheduled maintenance tasks. Start by entering the cabin, then insert the key and turn on the instrument panel.

Next, navigate to the "Trip A" mileage using the "MODE" button on the dashboard, turn off the ignition and turn it back on while holding the same button, releasing it only once the interval has been successfully reset.


Updated on 28 October 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Radio in the Toyota Urban Cruiser
Guide to Replacing the Radio in the Toyota Urban Cruiser
Toyota Urban Cruiser (2009-2014 / MK 1) In today's video, you will see the main steps to remove and replace the standard radio with a new multimedia system in the Toyota Urban Cruiser. Firs…
How to Reset the Maintenance Service on a Toyota Urban Cruiser
How to Reset the Maintenance Service on a Toyota Urban Cruiser
Toyota Urban Cruiser (2009-2014 / MK 1) Learn how to reset the maintenance service on a Toyota Urban Cruiser. Turn on the instrument panel of your car with the appropriate remote key; press…
How to Reset the Service Light of the Toyota Urban Cruiser?
How to Reset the Service Light of the Toyota Urban Cruiser?
Toyota Urban Cruiser (2009-2014 / MK 1) To reset the Service light of the Toyota Urban Cruiser, turn on the instrument panel and then repeatedly press the ODO TRIP button until "Trip A" app…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos