Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Bulbs on Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight

See other generations:
Video tutorial

Lift the bonnet and insert the support rod. For safety, disconnect the battery and remove the ignition key. As shown in the video, there is a small plastic pin behind the connector that needs to be pressed to release the clip and disconnect the connector.

Unscrew the burnt-out bulb (whether it's the position light or dipped beam) and pull it back to remove it from the holder.

If you intend to install an LED bulb with an aluminium heatsink and fan: fit it together with the holder until the tabs align. Press and screw in place.

Good luck!


Updated on 21 April 2026 by ScegliAuto


Related tutorials

Changing Headlight Bulb on a Toyota Yaris
Changing Headlight Bulb on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Do you want to change the bulb on your Toyota Yaris? Let’s see how to remove the damaged bulbs from the front headlight. Lift the front bonnet and lo…
Headlight Bulb Replacement for Toyota Yaris
Headlight Bulb Replacement for Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Are the headlight bulbs damaged? Let’s look at removing the front headlight bulbs from a Toyota Yaris. Lift the front bonnet of the car and secure it…
Replacing Yaris Headlight Bulb
Replacing Yaris Headlight Bulb
Toyota Yaris (2011-2019 / Xp130) Do you want to replace the front headlight bulbs on your Yaris? Here’s how to replace the damaged bulbs. Lift the front bonnet, reach in, and remove …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos