Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

This guide shows how to reset the service light on a Toyota Yaris. No specific tools are required for this operation.

First, turn on the ignition. At this point, use the "ODO" button to display "trip A" on the display.

Now, switch off the ignition. While holding the "ODO" button, turn on the ignition; during this operation, the service light (the spanner) will flash for a few seconds before disappearing, indicating that the reset is complete.

Switch off the ignition and turn it back on to check the success of the operation.


Updated on 6 May 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Toyota Yaris iA?
How to Reset the Service Light on the Toyota Yaris iA?
Toyota Yaris (2011-2019 / Xp130) To reset the Service light on the Toyota Yaris iA, turn on the instrument cluster by turning the key, then navigate to the display in the centre of t…
How to Reset the Service Light on the Toyota Yaris Hybrid?
How to Reset the Service Light on the Toyota Yaris Hybrid?
Toyota Yaris (2020-2026 / MK 4) To reset the Service light on the Toyota Yaris Hybrid, turn the ignition key to the 'on' position to access the menu that will appear on the instrume…
How to Reset the Service Light on a Toyota Yaris?
How to Reset the Service Light on a Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) To reset the Service light on a Toyota Yaris, press and hold the ODO/TRIP button located at the bottom right of the instrument panel while it is off.…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos