Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Fan of the Toyota 4Runner

Model: Toyota 4runner N180 - Years 1996-2002
Part: Blower motor

Discover the steps to remove and replace the cabin fan of the Toyota 4Runner in this guide. First, get inside the vehicle and remove the scuff plate on the front passenger side by unscrewing the screws; then remove the side plastic cover to access the cabin fan, as shown in the video. Next, unscrew the fan mounting screws and disconnect the electrical connector to remove it completely; finally, replace it with the new one, following the video tutorial to the end!

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Cabin Fan from a Toyota 4Runner
How to Remove the Cabin Fan from a Toyota 4Runner
Toyota 4runner (2002-2009 / N210) In this video tutorial, you will learn how to remove and replace the cabin fan in a Toyota 4Runner. First, get inside the vehicle and start by removi…
Where Are the Fuses Located in the Toyota 4Runner?
Where Are the Fuses Located in the Toyota 4Runner?
Toyota 4runner (2002-2009 / N210) In the Toyota 4Runner, the fuses are divided between two fuse boxes located inside the vehicle. The first box is positioned in the cabin, on the lowe…
How to Remove the Radio from a Toyota 4Runner MK4
How to Remove the Radio from a Toyota 4Runner MK4
Toyota 4runner (2002-2009 / N210) In this short video, you will learn how to remove and replace the original radio of the fourth generation Toyota 4Runner by following these simple st…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos