Do it yourself
Frequently asked questions about cars and motorcycles

What is the Fuse Diagram for the Toyota Yaris?

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Fuse box

In this video, see the location of the fuse boxes and their diagrams for the Toyota Yaris, useful if you need to check the fuse for a malfunctioning device. The first box is located inside the cabin, behind the dashboard on the driver's side, accessible by removing the small protective door first. The second box is located in the engine compartment, next to the battery. In some models, additional fuses can be found in the red box of the positive terminal. Always remember to use replacements of the same amperage as the fuses being replaced.

Updated on 13 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Yaris (2005-2011 / Xp90) The video attached to this article shows the exact diagram and placement of all the fuses in your Toyota Yaris. Fuses are designed to prevent damage …
Toyota Yaris (2005-2011 / Xp90) This guide will show you the positioning and diagram of the fuses for the Toyota Yaris, in simple steps. First, open the bonnet of the vehicle and lo…
Toyota Yaris (1999-2005 / Xp10) In this video, we can see the fuse diagram and the location of the respective boxes in the Toyota Yaris, useful if you need to check the status of a …

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2005-2011 - Where is the Toyota Yaris fuel pump relay located? Read answer
    • Yaris 2005-2011 - What is the Toyota Yaris horn fuse? Read answer

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos