Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Headlight Bulb on a Toyota Yaris

Model: Toyota Yaris Xp10 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Headlight bulb

See other generations:
Video tutorial

If you notice that one of the front headlight bulbs on your vehicle is no longer working, you can proceed with its replacement by following the instructions below and also using the images in the video. First, lift the bonnet and locate the headlight with the blown bulb.

Unscrew the rear cover of the bulb housing by turning it counterclockwise to access the bulb. Disconnect the power connector first and remove the bulb.

Take the new bulb, place it in the housing, reconnect the connector, and screw the protective cap back on.


Updated on 21 May 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Light Bulb on a Toyota Yaris
How to Remove the Rear Light Bulb on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Before you can start, open the tailgate of your Toyota Yaris. Begin by unclipping the clips that secure the internal cover on the side of the boot. N…
How to Replace the Headlight Bulb on the Toyota Yaris Hatchback?
How to Replace the Headlight Bulb on the Toyota Yaris Hatchback?
Toyota Yaris (2020-2026 / MK 4) To replace the headlight bulb on the Toyota Yaris Hatchback, open the bonnet to access the interior of the corresponding headlight. Here, disconnect …
How to Replace the Number Plate Bulb on a Toyota Yaris
How to Replace the Number Plate Bulb on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In this video, see how to replace the damaged number plate bulb fitted on a Toyota Yaris. Use a screwdriver to remove the number plate light unit loc…

Other guides you may be interested in

How to reset the service light on a Lancia Ypsilon?

When the service light comes on in a Lancia Ypsilon, as with any vehicle, it indicates that the car needs servicing, including an oil change and oil filter replacement. The vehicle shown in the video, the Lancia Ypsilon, can be easily maintained by yourself; changing the engine oil is not a complex task, nor is resetting the aforementioned light. Here’s the reset procedure: Turn on the ignition, press the accelerator pedal down, and press the brake pedal seven times. After this, wait sixty seconds, release the accelerator, and turn off the ignition. Reset completed.

Watch the video!


by ScegliAuto

More videos