Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of the Toyota Yaris

Model: Toyota Yaris MK 4 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Front bumper

See other generations:
Video tutorial

In today's tutorial, follow the instructions to remove and replace the front bumper of the Toyota Yaris. First, open the bonnet and start removing the plastic clips located at the top, using a thin lever (a flat screwdriver will also work); disconnect the connector at the top and unscrew the screws located on both sides of the front wheel arches, as shown in the video.

At this point, remove the additional screws found under the front bumper, then detach it from the sides until it is completely removed!


Updated on 24 May 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper of a Toyota Yaris
How to Remove the Front Bumper of a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Start by opening the bonnet of your Toyota Yaris by pulling the designated release handle located at the bottom left of the steering column. Next, un…
How to Remove the Headlamp from the Toyota Yaris 2
How to Remove the Headlamp from the Toyota Yaris 2
Toyota Yaris (2005-2011 / Xp90) How do you remove the headlamp from the Toyota Yaris? To remove the front headlamp of the Yaris, you need to take off the front bumper. Use a screwdr…
How to Remove the Front Bumper of a Toyota Yaris
How to Remove the Front Bumper of a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Before you start, open the bonnet of your Toyota Yaris. Begin by unscrewing and removing the screws that secure the front bumper to the chassis, loca…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos