Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Prius C Aqua
  6. : How do i replace the exterior mirror on the Toyota Aqua?

Toyota Prius C Aqua - Video tutorial

Model: Toyota Prius C Aqua MK 1 - Years 2011-2021
Part: Outside rearview mirror
Operation: How do i replace the exterior mirror on the Toyota Aqua?

In order to replace the rear-view mirror of the Toyota Aqua, the corresponding door panel must be completely disassembled: this panel will be fixed by the relative screws which must be removed. These screws are positioned in the seat of the internal handle and under the window control panel, which must be extracted from its housing and disconnected from its connector. In this way it will be possible to detach the panel and unscrew the internal screws in correspondence with the external rearview mirror. The latter can therefore now be removed and replaced with a new spare part.


Posted on 30 May 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos