Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

The Fuse Box in the Toyota RAV4

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part: Fuse box

In this video, you will see an overview of the fuse diagrams and discover the locations of the fuse boxes within the car, along with the designations and assignments of the relays in the Toyota RAV4. The location and assignments may vary depending on the vehicle's production year and country of manufacture. Each fuse is numbered for proper identification, and the relay box is located in the engine compartment near the battery. To replace a fuse, refer to the fuse diagram. Once you have identified the fuse to be replaced, proceed to remove it with the appropriate tweezers, and replace it with one of the same amperage.

Updated on 25 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Toyota RAV 4?
Where are the fuses located in the Toyota RAV 4?
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Any fuse present in the Toyota RAV 4 is located either inside one of the appropriate fuse boxes that are installed on the vehicle: in this type of ca…
Where is the fuse box located in the Toyota RAV 4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) The location of the fuse box in your 2018 Toyota RAV 4 is quite hidden and often difficult to locate. In this guide, we will provide you with all the…
Where to Find the Fuses on the Toyota RAV4?
Toyota Rav 4 (2000-2006 / Xa20, MK 2) In the Toyota RAV4, the fuses are located within dedicated fuse boxes installed in the vehicle: this model has two boxes for this purpose. The first …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos