Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Air Filter on the Toyota Rav 4

Model: Toyota Rav 4 MK 2, Xa20 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Air filter

See other generations:
Video tutorial

If you intend to replace the air filter DIY on this car model, the description below outlines all the simple steps and the procedure for a correct replacement. The air filter is located inside a box in the engine compartment.

Use a screwdriver to loosen the hose clamp on the air duct. Then lift the cover of the box after unfastening the retaining clips and remove the filter to replace it with the new one. Refit the cover over the box and secure the retaining clips, then tighten the hose clamp on the air duct.


Updated on 7 June 2026 by ScegliAuto


Related tutorials

How to Remove the Air Filter on Toyota Rav 4
How to Remove the Air Filter on Toyota Rav 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Remove the worn air filter on a Toyota Rav 4. Replace the part located inside the engine bay. Open the car door, pull up the bonnet release lever loc…
Replacement of the fuel filter of the Toyota RAV 4 2.2 D-4D
Replacement of the fuel filter of the Toyota RAV 4 2.2 D-4D
Toyota Rav 4 (2013-2018 / Xa40, MK 4) The following steps will show us how to disassemble and replace the diesel fuel filter of the Toyota RAV 4 2.2 D-4D. First, we open the hood of the c…
How to Replace the Air Filter on the Toyota Rav-4
How to Replace the Air Filter on the Toyota Rav-4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) In today's video, you will learn how to replace the air filter on the third-generation Toyota Rav-4. First, make sure the engine is cold to avoid unp…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos